Pl2303 Prolific Driver Installer V1 .5.0.zip

  1. Prolific Pl2303 Driver V3.3.2.102
  2. Pl2303 Prolific Driver Installer Windows 10
  3. Driver Pl2303 Windows 10
Pl2303 prolific driver installer windows 10

PL2303ProlificDriverInstallerv1.5.0.exe; Download file - link to post PL2303ProlificDriverInstallerv1.5.0.zip umpl2303DriverInstallerManualv1.5.0.pdf. PL2303 USB-to-Serial Bridge Chip Family Windows Driver Installer Manual For Windows 2000/XP/Vista/7 Operating Systems Windows Driver Installer v1.5.0 Release Contents Driver Version. In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager. In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose 'All Apps' - swipe or scroll right and choose 'Control Panel' (under Windows System section) - Hardware and Sound - Device Manager. Run or double-click the PL-2303 Windows Driver Installer v1.5.0 program. Do not plug-in the USB device yet. Unplug the device from the USB port before running the driver installation. The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver will be installed on your computer. Click Next to continue.

fabia I - komunikat 'brak sterownika gazu'

Kod 10 z objaśnieniem i do tego żółty wykrzyknik. To z czym się chcesz łączyć jak portu com nie masz? Niestety w takim przypadku nie połączysz się. Odinstaluj sterownik i zainstaluj ponownie pamiętaj by za każdym razem kożystać z tego samego portu. Nie zmieniaj gniazda do którego raz podłączyłeś interfejs diagnostyczny. T masz program do sprawdzenia chipu i sterownik. Całość nowa i powinno pomóc. Po poprawnej instalacji jak w menedżerze będziesz widzieć że wszystko jest w porządku możesz ustawić właściwości portu. To powinno rozwiązać problem.

  • PL2303_Prolific_DriverInstaller_v1190.zip
    • PL2303 Windows Driver User Manual v1.19.0.pdf
    • PL2303_CheckChipVersion_v1006.exe
    • PL2303CheckChipVersion_ReadMe.txt
    • PL2303_DriverInstallerv1.19.0_ReleaseNote.txt
    • PL2303_Prolific_DriverInstaller_v1190.exe

Prolific Pl2303 Driver V3.3.2.102

Download file - link to post

PL2303_Prolific_DriverInstaller_v1190.zip > PL2303 Windows Driver User Manual v1.19.0.pdf

PL2303 USB-to-Serial Bridge Chip Family
Windows Driver Installer User Manual
WHQL Driver Version Information
? Driver Installer & Build date: 1.19.0 (2017-10-31)
?
?
GUID: ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
WHQL WDM Driver: v2.1.51.238 (10/22/2013)
?
?
Windows 2000, XP, Server 2003 (32 & 64-bit)
WHQL WDF Driver: v3.8.18.0 (10/17/2017)
?
Windows 10 TH1/TH2/RS1/RS2/RS3 (32 & 64-bit)
?
Windows Vista, 7, 8, 8.1 (32 & 64-bit)
?
Compatible with Windows Server 2008/2008R2, Server 2012/2012R2, Server 2016 (64-bit)
?
Drivers automatically install via Windows Update (need Internet connection)
System Requirements
?
PC with USB 1.1/2.0/3.0/3.1 Host Controller (USB Port) and Windows OS.
?
USB Device with below PL-2303 chip versions and their supported OS Family:
Windows
Windows
2000 / XP
Vista / 7
Server 2003
Server2008/R2
(32 & 64 bit)
(32 & 64 bit)
PL-2303H
Yes
PL-2303HX (Rev A)
PL-2303X or XA
Windows 8 / 8.1
Windows 10
Server2012/R2
Server 2016
(32 & 64 bit)
(32 & 64 bit)
Yes
Not Supported*
Not Supported*
Yes
Yes
Not Supported*
Not Supported*
Yes
Yes
Not Supported*
Not Supported*
Yes
Yes
Yes
Yes
PL2303TA
Yes
Yes
Yes
Yes
PL2303TB
Yes
Yes
Yes
Yes
PL2303EA
Yes
Yes
Yes
Yes
PL2303RA
Yes
Yes
Yes
Yes
PL2303SA
Yes
Yes
Yes
Yes
Chip Version
PL-2303HX (Rev D) or
HXD
* - PL2303H, PL-2303HX (Rev A), and PL-2303X are EOL and discontinued chips and Prolific will not
provide Windows 8 (and above versions) driver support. New driver versions will show yellow mark (Error
Code 10) in Device Manager for these EOL chip versions under Windows 8 or above OS versions.
- 1 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Microsoft Hardware Certification Report
Prolific driver has been tested and submitted for Microsoft Windows hardware certification.
- 2 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Windows Driver Installation
This section will guide you on how to install the PL-2303 Windows Driver. You can download the latest
Driver Installer program from Prolific Support website:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
The following steps will show how to install the device under Windows 7 (64-bit) OS as this is the most
inquired driver installation support received by Prolific. The procedures are the same and straightforward for all other supported Windows operating system versions.
1.
Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver
Installer program.
2.
The InstallShield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
will be installed on your computer. Click Next to continue.
- 3 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
3.
The PL-2303 Driver Installer program will then start to install the drivers needed.
4.
Click the Finish button to close the InstallShield program. If you have plugged the cable into the
PC while running the setup installation, please unplug and replug the cable for the system to
detect the device.
- 4 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
5.
Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
Prolific USB-to-Serial Comm Port. Go to Device Manager and check for the 'Prolific
USB-to-Serial Comm Port' device and the COM port number assigned by Windows.
6.
You can also check the driver version by right-clicking on the 'Prolific USB-to-Serial Comm Port'
device and select Properties and Driver tab.
- 5 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Warning!!!
If you are encountering yellow mark (Error Code 10) for device in Device Manager under Windows XP,
Vista, or Windows 7, you need to contact the cable vendor or manufacturer for possible counterfeit
chip. Prolific does not manufacture or sell any end-user market products and will not provide or be
responsible for direct support to end-users.
- 6 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Windows Driver Installation (via Windows Update)
This section guides you on how to install the PL-2303 Windows Driver via Windows Update. You will
need an Internet connection to automatically download and install the drivers via Windows Update:
Operating Systems
Windows Update
Windows 7
Windows 8 / 8.1
Windows 10
(32 & 64 bit)
(32 & 64 bit)
(32 & 64 bit)
?
?
?
1.
Check if your Internet connection is OK. Plug in PL-2303 USB to Serial cable.
2.
Windows will automatically check Windows Update if driver is available and will download and
install the driver instantly.
- 7 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
3.
Windows will then prompt you that Prolific USB-to-Serial Comm Port (COMx) is installed and
ready to use.
- 8 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
4.
You can also right-click on the USB-Serial Controller device and click Update Driver.
- 9 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
- 10 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Driver Advanced Settings
Starting from Driver v3.8.18.0, there are several advanced settings which users can control.
No.
Default
Description
10 sec
1
Advanced Setting
Idle Timer for the PL2303 chip to enter suspend
mode (COM port not open).
USB Selective Suspend Idle
Timer
NOTE: For PL2303HXD/EA/RA, you need to write
OTPROM first.
This option does not work for PL2303SA.
Enable
2
Disable DTR/RTS INIT signal
3
Change DTR/RTS INIT Level
Shift
Check this item to disable DTR/RTS pin initialization
signal during driver load.
NOTE: This will prevent driver from detecting serial
mouse and serial modem.
TTL=HIGH
RS232=LOW
Check to change DTR/RTS INIT level shift to
TTL=LOW and RS232=HIGH.
NOTE: This item will not work if 'Disable DTR/RTS
INIT signal' is on.
Enable
4
Driver Buffer Size
4096
Control the driver buffer size.
Disable Device USB Serial
Number in Windows Registry
5
Check this to ignore PL2303 device Serial Number
(set IgnoreHWSerNum in Windows registry). If
disabled, each PL2303 device with different USB
serial number will be treated as same device (no
serial number) when plug to same USB port and will
keep the same COM port number. This feature is
useful for factory manufacturing use so the COM port
number will not accumulate.
- 11 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
Uninstalling the PL-2303 Driver
To uninstall the PL-2303 driver, follow the below steps:
1.
Click Start - Control Panel - Programs - Programs and Features - Uninstall a Program. Look for
the 'PL-2303 USB-to-Serial' program and click the Uninstall (Remove) button.
2.
InstallShield Wizard will then start the maintenance program and will prompt you to choose if you
want to modify, repair, or remove the driver. Click the Remove button and click Next to begin the
driver uninstall.
- 12 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
3.
The InstallShield Wizard will prompt you to confirm to uninstall. Click Yes to continue.
4.
Wait for the InstallShield Wizard to complete the uninstall process. When complete, click Finish
to end the program. Wait for some few seconds until the 'PL-2303 USB-to-Serial' program is
removed from the Control Panel Uninstall (Add or Remove Programs) program list.
- 13 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.
5.
If you are using Windows Server versions or installed the driver thru Windows Update, you may
need to do this extra step if driver is not completely uninstalled. Plug back the PL2303 device to
the computer and go to Device Manager and right-click 'Prolific USB-to-Serial Comm Port'. Click
Uninstall and click enable the checkbox 'Delete the driver software for this device'. Click OK to
completely uninstall the driver.
- 14 of 14 All information herein is subject to change without prior notice. Prolific Technology Inc. does not make any warranties regarding
the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial
damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be
reproduced or transmitted in any form by any means without the express written permission of the manufacturer.

3.2.0.0
Driver

PL2303_Prolific_DriverInstaller_v1190.zip > PL2303CheckChipVersion_ReadMe.txt


PL-2303 CheckChipVersion Tool Program v1.0.0.6
For Windows OS Only
System Requirement:
. USB 1.1/2.0/3.0 Host Controller
. Device using PL2303HX/X/EA/RA/SA/TA/TB version chips
. PL-2303 Windows Driver Installer v1.8.0 or above
. Supports the following Windows OS Family:
- Windows XP SP2 and above (32 & 64 bit)
- Windows Vista (32 & 64 bit)
- Windows 7 (32 & 64 bit)
- Windows 8/8.1/10 (32 & 64 bit)
NOTE:
- Windows 8 is NOT supported in HXA/XA chip versions (will show yellow mark Error Code 10).
- Windows 8 is supported only in following chip versions:
- PL2303HXD (HX Rev D)
- PL2303EA (ESD protection)
- PL2303RA (Built-in transceiver)
- PL2303SA (SOP8 package)
- PL2303TA (PL2303HXA/XA replacement)
- PL2303TB (12 GPIO)
Supported device ID and product strings:
. VID_067B & PID_2303 for " Prolific USB-to-Serial Comm Port "
. VID_067B & PID_2304 for " Prolific USB-to-Serial Comm Port " (PL2303TB chip)
. Other VID/PID based on PL2303 chip.
How to Run Tool Program
1. Install PL-2303 Windows Driver Installer v1.8.0 or above.
2. Plug PL2303 USB Device and go to Device Manager to check COM Port number.
3. Run PL2303CheckChipVersion tool and set COM Port number.
4. Click Check button to show PL-2303 chip version.
NOTE: This program cannot detect HXA/XA chip in Windows 8 and above.
Download Latest Driver here:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Prolific Technology Inc.
http://www.prolific.com.tw

Pl2303 Prolific Driver Installer Windows 10


Driver Pl2303 Windows 10

PL2303_Prolific_DriverInstaller_v1190.zip > PL2303_DriverInstallerv1.19.0_ReleaseNote.txt


PL2303 Driver Setup Installer, Prolific Edition
Setup Installer Revision Note History
System Requirement:
. USB 1.1/2.0/3.0/3.1 Host Controller
. Device using PL2303HXA/XA/HXD/EA/RA/SA/TA/TB version chips
. Supports the following Windows OS Family (32 and 64 bit):
- Windows XP SP3
- Windows Server 2003
- Windows Vista
- Windows Server 2008
- Windows 7
- Windows Server 2008R2
- Windows 8
- Windows Server 2012
- Windows 8.1
- Windows Server 2012R2
- Windows 10 (TH1/TH2/RS1/RS2/RS3)
- Windows Server 2016
NOTE:
- PL2303HXA/XA EOL chip versions (discontinued) will NOT be supported in Windows 8/8.1/Server2012/Server2012R2 and Windows 10 onwards.
- Download latest PL2303 CheckChipVersion tool program to check chip version in Windows 7. (Or contact your cable vendor)
- Prolific recommends cables with PL2303HXD or PL2303TA chip.
- Windows 98/ME/2000/XP driver technical support are discontinued.
Supported device ID and product strings:
. VID_067B & PID_2303 for " Prolific USB-to-Serial Comm Port " (PL2303 series)
. VID_067B & PID_2304 for " Prolific USB-to-GPIO/PWM Port " (PL2303TB chip)
Driver Versions:
-------------------
- WDF WHQL Driver: v3.8.18.0 (10/17/2017) - for Windows 7/8/8.1/10; Server2008/2008R2/2012/2012R2/2016
- WDM WHQL Driver: v2.1.51.238 (10/22/2013) - for Windows 2000/XP/Server2003
Release Notes:
---------------
PL2303 Driver Installer v1.19.0
Installer & Build date: 1.19.0 (2017-10-31)
GUID:ECC3713C-08A4-40E3-95F1-7D0704F1CE5E
Windows WDF WHQL Driver v3.8.18.0 (10/17/2017):
Driver Revision Change:
--------------------------------
. Driver Certified for Windows 10RS3 (version 1709 build 16299.15)
. Fixed customer low baudrate timing issue
. Added Advanced Port Settings in Driver Properties (Device Manager)
Previous History:
Driver 3.8.12.0 (Driver Installer v1.18.x):
-------------------------------------------------------
. Added WDF co-installer WdfCoInstaller01009.DLL and SER2PL.DLL:
- Fixed Windows Vista driver support installation issue.
- Modify/Added several baud-rate support display in Driver Properties
NOTE: Actual baud-rate setting is still dependent on the serial port software settings.
Driver v3.8.10.0 (Driver Installer v1.17.0):
--------------------------------------------------------
. Fixed 1200bps baud rate data error customer issue.
. Fixed docking system sometimes cannot detect device during suspend-resume burnin test.
Driver v3.8.30 (Driver Installer v1.16.0):
-----------------------------------------------------------
. Fixed COM port no response (freeze) when doing continuous quick USB hotplug with serial mouse attached.
Driver v3.8.2.0 (Driver Installer v1.15.0): {unreleased}
------------------------------------------------------------
. Fixed RS485 compatibility (using RTS pin control) in PL2303HXD OTPROM Writer setting.
- For RS485 cable based on Prolific reference schematic, need to use latest EEWriter v2.2.0.0 or above.
Driver v3.8.1.3 (Driver Installer v1.14.0):
------------------------------------------------------------
. Formal submit driver for Windows 10 Redstone version 1607 Build 14393 (Anniversary Update) and Server 2016 HLK certification.
. Fixed customer issue for 19200bps baudrate timing (PL2303TA chip) on BGM device.
Driver v3.8.0.0 (Driver Installer v1.13.0): {unreleased}
------------------------------------------------------------
. Add Windows 10 Device Guard compatibility (Hypervisor Code Integrity Readiness HLK Test).
. Fixed Notebook PC USB Docking hotplug issue in Windows 7 and Intel USB 3.0 host (cannot release COM port).
Driver v3.6.81.357 (Driver Installer v1.12.0):
-----------------------------------------------------------
. Fixed timing delay issue.
Driver v3.6.78.350 (Driver Installer v1.11.0):
-----------------------------------------------------------
. Fixed customer BSOD issue when plug in USB 3.0 host controller under Windows 8.1.
. Supports GPIO default value configuration in external EEPROM or OTPROM using EEWriter v2.1.0.0.
. Passed Windows 10 logo certification (HLK).
Driver v3.4.67.325 (Driver Installer v1.10.0):
----------------------------------------------------------
. Fixed Win7/8 to WinXP data transfer customer issue (38400bps). Adjust timeout constant.
. Fixed problem with SecureCRT program when setting DTR/DSR flow control.
. Fixed ClearCommError issue.
. Added 5787 and 300kbps baudrate support.
. Supports " IRP_MJ_CLEANUP " . Fixed customer application cannot re-open COM port after closing port.
. Improve device enumeration when PC reboots and device is plugged in.
Driver v3.4.62.293 (Driver Installer v1.9.0):
---------------------------------------------------------
. Driver will delay 1.5ms when AP execute GET_MODEMSTATUS.
. Fixed teraterm timeout/slow response issue.
. Fixed GPIO 2 & 3 function for HXD chip.
. Add 3250000bps baud support.
. GPIO 2,3 set as default input pin.
. Add auxiliary GPIO 4~7 driver support for HXD chip.
. Fixed modem issue (Disable SerialWdmFileRead).
. Add 256000 bps baud support for PL2303TA/TB.
. Fixed customer VB AP issue.
. Improve Serial Mouse enumeration.
Driver v3.4.48.272 (Driver Installer v1.8.0 & 1.8.19):
-------------------------------------------------------------------
. Fixed 110 bps on PL2303RA/SA/EA/TA/TB.
. Modify CheckChipVersion API (do not lock VID/PID).
. Fixed HXD chip is detected as HXC chip when BCD is written as 0300 instead of 0400.
. Added 80bps baud support.
. Fixed GPS device will be detected as MS Serial Ballpoint device.
. Fixed driver conflict with different VID/PID device. (STATUS_OBJECT_NAME_COLLISION)
. Fixed Teraterm loopback timeout issue.
Driver v3.4.36.247 (Driver Installer v1.7.0):
--------------------------------------------------------
. Fixed Putty/HTerm BSOD issue in Win7 64-bit. (for HXD chip only)
. Fixed HyperTerminal timeout issue when transferring large file. (for HXD chip only)
. Fixed Windows HCK logo test for Windows 8, 7, Vista WHQL driver.
Driver v3.4.31.231:
------------------------------
. Added driver support for new chip versions (PL2303EA, RA, SA).
. Supports new CheckChipVersion v1.0.0.2 and above program for checking all Prolific chip version.
. Fixed COM Port won't disappear when unplug PL2303 during data transfer (Write Timeout issue).
. Fixed Putty program BSOD issue on continuous transfer at 115200bps.
. Fixed 12Mbps baudrate support for PL2303TB chip version.
. Does NOT support Windows 8 for EOL chip versions (PL2303H, PL2303HXA, PL2303XA).
. For Windows 8: use PL2303HXD, PL2303TA, PL2303EA, PL2303SA, PL2303RA, PL2303TB.
Driver v3.4.25.218:
------------------------------
. Added driver support for Prolific next-gen USB-to-Serial chips (Codename TA/TB).
- old driver will not work on baudrates higher than 115200bps.
. No driver functional difference for current H/HX/X chip versions.
Driver v3.3.17.203:
------------------------------
. Use different service name in INF file to avoid driver conflict with XP INF driver.
- change line in INF file to {Serial.SVCDESC = " Prolific Serial port WDFdriver " }
. Added USB Selective Suspend power saving feature requested by Notebook PC vendors.
- Chip will go to sleep mode when idle for 10 seconds and COM port not open.
- Chip will NOT go to sleep mode when COM port is OPEN.
- requires to write Remote Wakeup in external EEPROM.
. Modify " SerialUndoExternalNaming " routine.
- Fix COM port is not removed in registry when device is unplug and program still open.
- update registry HKEY_LOCAL_MACHINEHARDWAREDEVICEMAPSERIAL COMM when unplug and replug.
. Added support for TransmitCommChar() function.
. Added SpinLock function to fix customer GPS application.
Windows WDM 2000/XP/Server2003 Driver v2.1.51.238 (10/22/2013)
Beginning September 2014, Windows XP driver will not be updated anymore.
Driver Change from v2.1.44.226 (Driver Installer v1.8.0 & 1.8.19):
------------------------------------------------------------------
. Driver will delay 1.5ms when AP execute GET_MODEMSTATUS.
. Fixed GPIO 2 & 3 function for HXD chip.
. Add 3250000bps baud support.
. GPIO 2,3 set as default input pin.
. Add auxiliary GPIO 4~7 driver support for HXD chip.
. Add 256000 bps baud support for PL2303TA/TB.
. Improve Serial Mouse enumeration.
. Fixed WHQL test using HCK 2.0.
Driver Change from v2.1.35.211 (Driver Installer v1.7.0):
---------------------------------------------------------
. Fixed 110 bps on PL2303RA/SA/EA/TA/TB.
. Modify CheckChipVersion API (do not lock VID/PID).
. Fixed HXD chip is detected as HXC chip when BCD is written as 0300 instead of 0400.
. Added 80bps baud support.
. Fixed GPS device will be detected as MS Serial Ballpoint device.
. Fixed Disable-Enable device issue in Windows 2000 Device Manager.
Driver Change from v2.1.30.193:
------------------------------
. Fixed write timeout intermittent issue (COM port won't disappear) during USB surprise removal.
. Fixed new Windows HCK logo test for XP WHQL driver.
Driver Change from v2.1.27.185:
------------------------------
. Added driver support for new chip versions (PL2303EA, RA, SA).
. Supports new CheckChipVersion v1.0.0.2 and above program for checking all Prolific chip version.
. Fixed COM Port won't disappear when unplug PL2303 during data transfer (Write Timeout issue).
. Fixed 12Mbps baudrate support for PL2303TB chip version.
Driver Change from v2.0.16.166:
------------------------------
. Added driver support for Prolific next-gen USB-to-Serial chips (Codename TA/TB).
- old driver will not work on baudrates higher than 115200bps.
. No driver functional difference for current H/HX/X chip versions.
Driver Change from v2.0.13.130:
------------------------------
. Use different service name in INF file to avoid driver conflict with Vista/7 INF driver.
- change line in INF file to {Serial.SVCDESC = " Prolific Serial port WDMdriver " }
. Added 10ms delay (downstream buffer) on close COM port to fix customer MCU application.
Language Support:
- English (default)
- Chinese (Traditional)
- Chinese (Simplified)
- Japanese
Download Latest Driver here:
http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225 & pcid=41
Counterfeit Warning!!!
Please be warned that counterfeit/fake PL-2303HX Chip Rev A (or PL-2303HXA) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, are being sold in the China market. Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality and causes Windows driver compatibility issues (Yellow Mark Error Code 10 in Windows 7 Device Manager). We issue this warning to all our customers and consumers to avoid confusion and false purchase. Only purchase branded cables that provide technical support and warranty service. Prolific does not manufacture nor sell end-product cables.
How to Install Driver
1. Unplug any PL2303 USB Device first.
2. Run Driver Installer EXE program to install. Wait to finish.
3. Plug PL2303 USB Device and go to Device Manager to check COM Port number.
4. If PL2303 is embedded, you might need to restart Windows or rescan hardware in Device Manager.
5. Refer to PL2303 Windows Driver User's Manual.
NOTE: For silent install, include the syntax " /s " at the end of the EXE installer program.
For example: " PL2303_Prolific_DriverInstaller_v1.10.0.exe /s "
Prolific Technology Inc.
http://www.prolific.com.tw